Your Questions

Is the unit simple to programme?

Just switch to "PROGRAMME" on the unit and key in your chosen "alarm" telephone number and then SWITCH TO OFF & THEN STRAIGHT TO ON. The unit is now ready to test.

What if I have "no service" for my mobile?

Simply programme in a land line telephone number instead.

Is it possible to monitor two rooms at the same time?

Bébétel is very sensitive so if you set it to HIGH you can supervise two rooms next to each other. Place the unit between the two rooms, leaving the doors open. Always test the units however with some noise activity.

How do I programme the Bébétel Extra unit in a hotel?

You will first need to get an external line (find out from the hotel what this is – though usually 0 or 9) and then programme your mobile or other alarm number.

How do I programme my mobile number into the Bébétel when using abroad?

When abroad and using a UK mobile you must dial the UK international code, followed by your mobile number minus the first 0.
e.g. 00 44 (0)2591 121212

Will I run up a large hotel telephone bill using Bébétel Extra?

No. The telephone line is not permanently open. Only once the device is activated to connect to your alarm number will a charge start to be incurred.In most instances, this connection need only be seconds long.

Which mobile phones are compatible with Bébétel Mobile?

For a comprehensive and constantly updated list, check with www.bebetel.com/mobiles or contact your supplier.

Are other mobile phones compatible with Bébétel Mobile which are not listed?

No. Please note that even it appears that the connection cable will fit into your mobile phone, if it is not listed as compatible, it will not work with Bebetel Mobile.

Will an alarm call from Bébétel Mobile only go out to a compatible mobile phone?

No, you can use ANY mobile phone or landline. Only the mobile phone connected to the unit must be compatible.

My Nokia mobile is listed as compatible with Bébétel Mobile but is not working. What can I do?

Connect the mobile connection cable to the Nokia. There must be a display on the Nokia that the data cable is connected. If not, remove cable and try again and/or clean the Nokia jack (sometimes there is dirt to remove).